14,20 51,29 

  • Supplied in 600mm Lengths
  • 2.5mm and 3mm thickness available


SF100 – Sheffield’s Stainless Steel. Originally conceived as a razor blade steel, SF100 is a fine-grained stainless steel, with a great combination of toughness, corrosion resistance, ease of resharpening and polishing. Similar in composition to AEB-L/13C26/14C28N it is a great cost-effective alternative.  

Country Of Manufacture:

Sheffield, United Kingdom

Supplied by Ground Flat Stock

Chemical Composition:

C: Cr: Mn: P: S: Si:
0.68% 13% 0.75% 0.025% 0.02% 0.4%

Suggested Heat Treatments:

Heat to 1080C Hold for 30 minutes

Air Quench

Temper twice for two hours at 175C for 62HRc or

Temper twice for two hours at 225C for 60HRc

Supplied  in 600mm Lengths


The Sheffield made Stainless Steel it one of the finest blade steels and comes Hot Rolled, Pickled  and Annealed. It will arrive ready and able to be forged and ground into a blade.


Continue shopping:

Check our full selection of Carbon and Stainless Knife Steels Here

Additional information

Weight N/A
Dimensions N/A
Width (mm)

40, 50, 75, 100, 150

Thickness (mm)

2,5, 3